On the hunt for a thrilling flight experience? DJI’s FPV Goggles are just the ticket. But with the release of the new DJI Goggles 2 bundled with the DJI Avata FPV drone, you might be scratching your head over whether to buy or upgrade from the older V1 & V2 models.
Choosing between DJI FPV Goggle models can be a puzzle. In this piece, we’ll stack up the V1 and V2 models, focusing on their price, features, and overall performance. By the time you’re done reading, you’ll know the ins and outs of these two models, helping you make a smart choice.
So, let’s jump right into our DJI FPV Goggles V1 vs V2 showdown.
To simplify your decision between the DJI FPV Goggles V1 and V2, we’ve laid out a detailed side-by-side comparison. This rundown covers the key specs and features of each model, allowing you to spot the differences at a glance.
Now, let’s dive into the head-to-head comparison of the DJI FPV Goggles V1 vs V2:
|DJI Goggles v1
|DJI Goggles v2
|Approx. 420 g (headband and antennas included)
|Approx. 420 g (headband and antennas included)
|2-inch × 2
|2-inch × 2
|Screen Resolution (Single Screen)
|1440 × 810
|1440 × 810
|Screen Renew Rate
|2.4 GHz & 5.8 GHz
|Live View Mode
|Low Latency Mode (720p/120fps)
High-Quality Mode (720p/60fps)
|Low Latency Mode (810p/120fps)
High-Quality Mode (810p/60fps)
|up to 17V (2S to 4S)
|up to 25.2V (2S to 6S)
|Video Output Support
|Interpupillary Distance Range
|Supported Storage Card
|microSD (up to 128 GB)
|microSD (up to 256 GB)
|DJI FPV Air Unit, Caddx Vista, Analog Transmitters
|DJI FPV Air Unit, Caddx Vista
|Compatible with Avata
|Compatible with DJ FPV(O3 Unit)
|Wireless Display Projector
From the comparison, it’s clear that the DJI FPV Goggles V2 boasts major enhancements like better display resolution, improved refresh rate, and a different antenna setup compared to the V1.
Plus, the V2 supports digital video transmission for a more stable, clearer video feed whereas the V1 uses analog transmission. Still, the V1 remains a solid choice if you favor analog transmission or plan to use analog transmitters.
DJI FPV Goggles V1 vs V2: A Complete Guide
The DJI FPV Goggles V2 is the newest addition to the DJI FPV Goggles family, boasting some notable upgrades from its older brother, the DJI FPV Goggles V1.
Here you can find the complete guide of the DJI FPV Goggles v1 vs v2:
Look and Feel
When it comes to their looks, both the DJI FPV Goggles V1 and V2 are pretty much twins. Both have a smooth, black design that’s undeniably cool and sure to draw attention. But, the DJI FPV Goggles V2 does have a few minor design tweaks that set it apart from the older model.
One of the top design upgrades of the DJI FPV Goggles V2 is its more polished finish. The goggles now have a more refined texture that feels good to hold and is easier on the face for those longer wear times.
This change is particularly noticeable around the eye cups, which have been reshaped to be more user-friendly, providing a more comfortable fit for a broader range of people.
If you want a mask that is more comfortable and fits your face profile, we have an option for you, which comes in three thicknesses.
When it comes to the screen, the DJI FPV Goggles V2 really outshines its older brother, the DJI FPV Goggles V1. The new kid on the block boasts a sharper screen with a resolution of 1440×810 pixels. That’s a big step up from the DJI FPV Goggles V1, which had a resolution of 1280×720 pixels.
The crisper screen on the DJI FPV Goggles V2 makes for a more thrilling flight experience. It lets you see everything in better detail and makes menu navigation a breeze. Plus, the DJI FPV Goggles V2 screen has a faster refresh rate of 144Hz, meaning the images on the screen will seem smoother and more lifelike.
Another major plus of the DJI FPV Goggles V2 screen is how bright it is. The goggles can reach a maximum brightness of 1500 cd/m², nearly double the brightness of the DJI FPV Goggles V1. This means the DJI FPV Goggles V2 screen stays clear even in bright daylight, making it easier to fly your drone outside.
The DJI FPV Goggles v1 and v2 may look like twins, but they’ve got some real differences under the inside, especially when it comes to their antennas. The v1 goggles work with the 5.8GHz frequency band, and its antennas are specially built to work best with these frequencies.
On the other hand, the v2 goggles work on both the 2.4GHz and 5.8GHz bands, and the drone can flip between the two for the best bandwidth and range. This means the antennas gotta be set up to support both frequency bands.
If you use the wrong antennas on either pair of goggles, you might end up with less-than-great performance and a smaller range, so it’s super important to use the right antennas.
To keep them straight, it’s a good idea to mark the antennas clearly. If you accidentally mix up the antennas, you can tell them apart in a couple ways. The v1 antennas are a tad heavier and have two small bumps on top, while the v2 antennas are lighter and have three bumps.
Keeping track of which antennas go with which goggles is key for the best flying experience.
Response time is another key thing to think about when weighing up the DJI FPV Goggles V1 and V2. The DJI FPV Goggles V2 takes the lead in this category, as it has a quicker response time than the DJI FPV Goggles V1. The DJI FPV Goggles V2 has a response time of just 28ms, while the DJI FPV Goggles V1 clocks in at 50ms.
This means that the DJI FPV Goggles V2 are snappier and make for a more exciting flight experience. With a faster response time, the goggles can get the video from your drone to your eyes in a flash, cutting down the lag between what you see and what’s actually happening. This makes flying your drone and dodging obstacles or adapting to changes in the environment a lot easier.
Plus, the DJI FPV Goggles V2 uses a fresh digital transmission system, known as O3, which cuts down the response time and gives a steadier video feed. This is a big step up from the DJI FPV Goggles V1, which used an older analogue transmission system.
The DJI Goggles V2 has a quicker screen refresh rate of 144 Hz, beating out the V1’s 120 Hz. When it comes to live view modes, the V2 gives two choices: Low Latency Mode at 810p/120fps and High-Quality Mode at 810p/60fps.
The V1, on the flip side, offers a Low Latency Mode at 720p/120fps and High-Quality Mode at 720p/60fps. Both models of the goggles record videos in the MP4 format, using H.264 encoding.
The DJI FPV Goggles V2 come with a detachable battery that you can easily swap out or charge up. On the other hand, the DJI FPV Goggles V1 doesn’t have a detachable battery and instead has a built-in one that you charge with a micro USB cable.
In terms of how long they’ll last, both the DJI FPV Goggles V1 and V2 will give you about 110 minutes of battery life time. While the DJI FPV Goggles V1 comes with a built-in battery, the DJI FPV Goggles V2’s detachable battery design gives you more options for managing the battery.
You can quickly replace the detachable battery with a fully charged one, keeping your flying sessions going without a hitch.
So, if you’re big on battery life and how to manage it, the DJI FPV Goggles V2’s detachable battery design might be a real game-changer for you.
You can pair up the DJI V1 and V2 Goggles with a bunch of different drones, including ones that run on the DJI Air Unit, Caddx Vista system, and other FPV systems. Even though both can work with analog quads, you might need to use a doohickey like the Digidapter and an FPV receiver module.
Something worth mentioning is that the latest software update for the DJI Goggles v2 is all set to work with the new DJI O3 system, but the v1 isn’t. That makes the v2 a smarter choice if you’re looking for a set of goggles that’ll stand the test of time and give you a killer FPV experience.
Should I Get the DJI Goggles V1 or V2?
Deciding between the DJI Goggles V1 or V2? It really boils down to what you’re gonna use ’em for. If you’re gonna fly with the new DJI drone Avata or the O3 system, the V2 is your best bet ’cause the V1 just can’t keep up with the new DJI O3 system.
On the other hand, if you’re only gonna use the goggles with the older air unit and Vista system, picking up a used V1 could be a cheaper option. Consider things like image quality, lag time, and overall feel, ’cause the V2 really steps up its game in these areas.
In a nutshell, the DJI FPV Goggles V2 is a big upgrade from the V1. It’s got a sharper display, less lag, a better design, and a detachable battery for longer flights. So, while the V1’s still a decent choice, the V2 is the way to go if you want the best FPV experience possible.
Can I Use the DJI FPV Goggles with FPV Simulators?
Sure thing! You can definitely use the DJI FPV Goggles with FPV simulators. You’ll need an HDMI to RCA converter so you can hook up the goggles to the simulator, then just plug in an RCA to 3.5mm cable into the goggles.
Once you’re all connected, just choose the “AV in” option from the menu and you’re good to go. Just a heads up though, the picture might not be super crisp—it’ll probably look more like an analog signal inside the goggles.
Can I Use the DJI FPV Goggles V1 with the New DJI Avata Drone?
Nah, that’s a no-go. Only the DJI FPV Goggles V2 are compatible, not the V1.
We hope this review has helped you find the best DJI FPV goggles for your needs. If you have any further questions or suggestions, we’d love to hear from you! Please sign up for our newsletter to stay up to date with our latest articles, then visit our Facebook page and Instagram to join the community conversation.
If you found this review helpful, please share it on social media! Also, be sure to check out our other review post Top 5 Best Cheap FPV Goggles.
Thanks for reading, and happy FPV traveling!